Why a 1,500-Square-Foot House Can Have a 20-Square Roof
Yes, a 1,500-square-foot house can have a 20-square roof. A roofing square is 100 square feet of roof surface. A real estate listing often describes conditioned living space. The roofer measures the sloping surfaces that shed rain, including any garage or covered entry in the scope. Before you compare two bids, find out what each roofer measured.
Follow the roofline on one sample home
Imagine a single-story Melbourne home with 1,500 square feet of living space. The attached garage adds 300 square feet under roof. For this example, assume the covered entry and overhangs add another 100 square feet of horizontal area without overlapping the garage. That brings the footprint under the roof to 1,900 square feet.
Now suppose the contractor’s diagram shows 2,000 square feet once the slopes are measured. Divide 2,000 by 100 and you get 20 roofing squares. Those figures illustrate the math. A steeper roof, a two-story layout, or a screened enclosure with its own roof would change the calculation.

Measured area and ordered material are two different lines
A roof with hips and valleys needs cuts where one plane meets another. A bundle opened for a small triangular section may leave pieces that don’t fit the next section. If the sample estimate lists 20 measured squares and 22 squares of field shingles to order, the difference is two squares of material allowance. That example works out to 10 percent. Ask the roofer to explain the allowance for your roof shape.

Three questions to put beside each bid
Can you mark the house, attached garage, covered entry, and any porch on the same diagram?
Which figure is the measured surface, and which is the quantity of field shingles being ordered?
Where do starter shingles, ridge caps, tear-off, and any separate low-slope section appear in the proposal?
A bid can use a different format and still cover the same work. If one leaves the porch off the diagram, though, the two totals describe different jobs. Our roof replacement service covers homes, garages, and additions. Identify the sections you want included when you request a roof inspection, and ask us to walk through the measurements with you.





Comments